New, improved light engine for maximum performance and adaptability
SIM2 Perfect Fit Feature
New optics and mechanical components
New electronics and comprehensive connection panel
Lens memory for zoom and focus for improved installation flexibility
The Grand Cinema™ SUPERLUMIS projector achieves extraordinary picture quality through the partnership of the 0,95” 1080p DC4 DLP® chipset, the improved version of SIM2’s ALPHAPATH™ light engine, and 3D Triple Flash technology (144 Hz) for a smoother, natural, and fatiguefree 3D viewing experience.
No other projector technology can match the superb color depth, excellent contrast ratio (up to 30.000:1 with Dynamic Black™ and EC lens type in 2D mode).
With a choice of two lens types, High Brightness (HB) or Extended Contrast (EC), the SUPERLUMIS system can be fine-tuned to maximize image quality based on the room’s lighting scenario. The HB Lens yields up to 5,000 ANSI Lumens, and the EC Lens delivers up to 3,800 ANSI Lumens. For a large-screen system and/or one with ambient light, HB is the ideal choice. For smaller screens and light-controlled rooms, EC extends the available contrast and usable black level.
SUPERLUMIS comes with SIM2 Perfect Fit feature, which enables the projector to display 2.35/2.40:1 video material by resizing the image to fill the screen without the need for an additional anamorphic lens.
Best projector technology for a true “Hollywood” picture-quality experience at home. Designed for use with large screen sizes (up to 5m – 16.5 ft wide).
3 Chip DMDs 0,95” 1080p DC4
High quality selected optic glass lenses
PureAction 3D technology
Triple flash genuine 144hz cinema reproduction
PureAction 2D for fast action materials
SIM2 DynamicBlack™ Technology enchanced solution (in 2D mode only)
Contrast ratio (Full ON/ Full OFF)
up to30,000:1 with DynamicBlack™ Technology and EC lens type (in 2D mode only)
350W dimmable to 280W
up to 5000 Ansi Lumens (adjustable) with HB lens
up to 3800 ANSI Lumens (adjustable) with EC lens type
Lamp life expectancy(*)
2000 hours typical in standard power mode; 3000 hours in ECO mode
High Brightness (HB)
Extended Contrast (EC)
Throw ratio standard lens
1.82-2.48:1 (type T2)
Throw ratio optional lenses
1.37-1.66:1 (typ. T1)
2.6-3.9:1 (typ. T3)
Motorized, vertical up to +50%, down -10% max. from screen center (based on image height)
VGA, SVGA, XGA, SXGA, UXGA, WUXGA 10 bit Full Channel Signal Board Video Processing
2 x HDMI-HDCP vers. 1.4a (v.1.4 with Deep Color)
1x Composite Video
1 x Graphic RGBVH (VGA-UXGA) (D-sub 15 pin)
1 x Component - Analog YPbPr/RGBs/RGBHV (RCA)
3D Sync out
1 x RS232 (D-sub 9 pin)
1 x USB (B type)
3 x 12V 100mA output (via Jack)
upgradable via RS232, serial interface or USB
Mains voltage range
100-240 +/-10% (48/62 Hz)
11 Kg. or 24.3 lbs
Projector dimensions (WxHxD)
458x210x455 mm (18”x8.3”x17.9”)
Installation and User Manual
AC power cords (2m - 6.6 ft)
Backlit remote control and batteries
Live Colors Calibration software 2.0
Premium SIM2 VISUS Active Glasses (4 pcs.)
Projector ceiling bracket
Anamorphic lens systems (fixed or motorized)
Additional VISUS active glasses
(*) Lamp life: the hours quoted have been measured in a lab under ideal test conditions. Lamp life varies depending on usage conditions and the surrounding environment. This is an average value that cannot be guaranteed and is not protected by warranty.
(**)ANSI Lumen Specification: This is the typical projector brightness specification found in most sales literature. This measurement allows for direct comparison with other manufacturer’s projectors. Measurements are taken in a totally dark test room with T3 type lens (wide angle zoom settings), brand new lamp at full power, lamp’s native white color temperature, internal test pattern (full white) and in compliance with ANSI IT7.228-1997 specification.
Due to constant product development, specifications are subject to change without notice.