DLP Projectors: Grand Cinema HT Line: HT200




- Designed specifically for home theatre
- Based on 1 DMD chip by Texas Instruments
- Proprietary high performance optical engine design (sealed)
- Lens shift and digital keystone adjustment
- Long Throw Ratio zoom lens
- Resolution: 800x600 pixels
- Multiple choice of inputs
- Remote Input Interface (optional)
- Ceiling and floor bracket (optional)
- Style Bracket (optional)
The HT200 projector is the standard model from the GRAND CINEMA HT line. The HT200 features a 800x600 pixels resolution, a high definition zoom lens with a Long-Throw ratio customised for home use, a proprietary sealed optical engine design, an optical and digital keystone adjustment, state-of-the-art VLSI, as well as a 4-segment colour wheel that dramatically improves the colours performance.
Light Engine
DLP™ Type | Proprietary sealed optical Engine based on 1 DMD™ Chip. Sealed housing |
Resolution | SVGA (800 x 600 pixels) |
Lens | High quality, high resolution optics with both motorised zoom and focus adjustments |
Lamp power consumption & life time | 120W, 6000 hours* |
Installation
Optical keystone adjustment | +/-10° |
Digital keystone adjustment | +/-17° vertical |
Screen size (diagonal) vs. Throw Distance | |
Throw ratio | 2.3 – 3.1:1 60" - min. 2,8m - max. 3,85m 80" - min. 3,74m - max. 5,14m 100" - min. 4,67m - max. 6,42m |
Picture size | 50-250 inches diagonal. |
Aspect ratio | 4:3, 16:9, anamorphic, letter box plus 3 custom-user adjustments |
Electronics
Horiz. Scan freq. | 15-80KHz (max horizontal freq. corresponding to UXGA, 60Hz) |
Vert. Scan freq. | 48-100Hz |
Video standard & graphic resolutions | PAL B,G,H,I,M,N,60, SECAM, NTSC 3.58 &4.43 automatically selected; HDTV |
De-interlacer | Proprietary chip on board, optimised for video images |
Contrast Ratio (full On / full Off) | > 600:1 |
Colour Temperature | 3 preset colour temperatures plus a RC user adjustment acting directly on each colour (red, green and blue) |
Special Video Enhancements Luma-Choma Delay Adjustment by OSD |
Inputs/Outputs
Analog | 1 Composite video via RCA connectors |
1 S-VHS via mini Din 4 pin | |
1 RGBHV via Dsub 15 (PC input) | |
1 x RGBS/YCrCbS via 4xRCA connectors | |
Control | 1 Remote Input Interface, type Microcross P&DA (EVC), Standard VESA |
1 x RS232 on Dsub 9 pins connector | |
Miscellanous | 1 x jack 12V power output, active when the projector is ON |
1 x jack 12V power output, active when 16:9 format is selected (max 12V power output 100 mA ) |
General Specifications
Control | Software can be upgraded via RS232 serial interface |
Power Consumption | 170 W max |
Mains voltage range | 120 - 240 Vac, -/- 10% |
Mains frequency range | 48/62 Hz |
Cabinet dimensions (W x H x D) | 350x167x318 mm (13,8” x 6,6” x 12,5”) |
Weight | 5 Kg. (11 lbs) |
Certifications
Vibration | in compliance with IEC 68-2-6 |
Safety | In compliance with EN 60950/UL 1950 |
Emission | In compliance with EN 55022 class B/150KHz - 30MHz |
Recyclable packaging |
Accessories
Supplied | AC power cords (EU, UK and USA), length 3m |
User standard remote control with batteries | |
Installation and user manual + CD Rom | |
Optional | Remote Input Interface including special connection cable between the Projector and the Remote Input Interface, 10m long |
Ceiling bracket and Grand Cinema Style floor/ceiling stand |
Cabinet Coulour
Standard | Silver Blue |
Optional | Racing Red, Black Shadow, Silver Gray and Pearl Gray |
(*) Lamp life: the hours quoted have been calculated in a lab under strict test conditions. Lamp life varies depending on usage conditions and the surrounding environment. The calculated lamp life cannot be guaranteed and is not protected by warranty
UNIT: | ASPECT RATIO: |
---|---|
in cm | 16:9 |
We use cookies on this site to enhance your user experience. By clicking any link on this page you are giving your consent for us to set cookies.